Abstract
The reliability of flood defenses is often dictated by large uncertainties in the hydraulic loading and the structural resistance. Additional information decreases uncertainty, however, acquiring it is often costly. One source of information, even though in many cases readily available, is hardly used - survived loads. This article shows how data on survived load conditions can be incorporated in reliability analysis by means of Bayesian techniques. The theory is illustrated by simple and realistic examples. In contrast to other sources of information, reassessing structures using survived load data always leads to higher reliability or lower probability of failure. Furthermore, attention is given to the expected development of failure in time. This may be relevant for situations, where the safety requirements of a structure are stated in terms of a design or inspection period. For both, re-assessing reliability based on (one time) survived loads as well as the expected increase of reliability in time, the examples show significant impact. Use of this knowledge, may, consequently, safe cost of construction or reinforcement.References
Bayes, T. (1763). "An Essay towards solving a Problem in the Doctrine of Chances." Philosophical Transactions of the Royal Society of London 53: 370-418.http://dx.doi.org/10.1098/rstl.1763.0053
Bligh, W. G. (1910). "Dams, barrages and weirs on porous foundations." Eng. News 64(Dec.): 708.
Ditlevsen, O. (1996). Structural Reliability Methods. Chichester, UK.
Faber, M. H., M. A. Maes, et al. (2007). Principles of risk assessment of engineered systems. 10th International Conference on Application of Statistic and Probability in Civil Engineering (ICASP10).
Hasofer, A. M. and N. C. Lind (1974). "An Exact and Invariant First-Order Reliability Format." ASCE 100(EM1): 111-121.
Hohenbichler, M. and R. Rackwitz (1983). "First order concepts in system reliability." Structural Safety 1: 177-188.http://dx.doi.org/10.1016/0167-4730(82)90024-8
Rijkswaterstaat (2005). Flood Risks and Safety in the Netherlands (Floris).
Rijkswaterstaat (2007). Hydraulische randvoorwaarden primaire waterkeringen.
Rijkswaterstaat (2008). Decimeringshoogten TMR2006 (RW1708-1_008).
Sellmeijer, J. B. (1988). On the Mechanism of Piping under Impervious Structures. Delft, The Netherlands, Delft University of Technology
Steenbergen, H. M. G. M. and A. C. W. M. Vrouwenvelder (2003). Theoriehandleiding PC-Ring - Deel A: Mechanismebeschrijvingen (2003-CI-R0020).