Abstract
Marine biofouling is a major concern in the operational performance of submerged floating tunnels (SFTs). Within years after construction, marine growth increases the effective dimension and mass of the SFT and hence, can substantially affect the hydrodynamic forces and alter the buoyancy-weight ratio (BWR). Therefore, roughness height is one of the most crucial factors influencing the hydrodynamic performance of the SFT. We investigated the effects of marine fouling and flow behavior around the SFT with varying roughness properties at different Reynolds numbers. Furthermore, the cross-section geometry of an SFT has a significant effect on flow behavior. In this study, the influence of increased surface roughness as caused by marine fouling on an SFT is investigated using Computational Fluid Dynamics (CFD). The roughness created by hard fouling is one of the main drivers of hydrodynamic changes (Marty et al., 2021).References
Henry, P. Y., Nedrebø, E. L., & Myrhaug, D. (2016). Visualisation of the effect of different types of marine growth on cylinders’ wake structure in low Re steady flows. Ocean Engineering, 115. https://doi.org/10.1016/j.oceaneng.2016.02.023
Langtry, R. B., & Menter, F. R. (2009). Correlation-based transition modeling for unstructured parallelized computational fluid dynamics codes. AIAA Journal. https://doi.org/10.2514/1.42362
Marty, A., Berhault, C., Damblans, G., Facq, J. V., Gaurier, B., Germain, G., Soulard, T., & Schoefs, F. (2021). Experimental study of hard marine growth effect on the hydrodynamical behaviour of a submarine cable. Applied Ocean Research, 114. https://doi.org/10.1016/j.apor.2021.102810
Schultz, M. P. (2007). Effects of coating roughness and biofouling on ship resistance and powering. Biofouling, 23(5). https://doi.org/10.1080/08927010701461974
Zeinoddini, M., Bakhtiari, A., Ehteshami, M., & Seif, M. S. (2016). Towards an understanding of the marine fouling effects on VIV of circular cylinders: Response of cylinders with regular pyramidal roughness. Applied Ocean Research, 59. https://doi.org/10.1016/j.apor.2016.05.013
Zou, P., Bricker, J., & Uijttewaal, W. (2020). Optimization of submerged floating tunnel cross section based on parametric Bézier curves and hybrid backpropagation - genetic algorithm. Marine Structures, 74. https://doi.org/10.1016/j.marstruc.2020.102807
Zou, Pengxu, Bricker, J. D., & Uijttewaal, W. (2021). Submerged floating tunnel cross-section analysis using a transition turbulence model. Journal of Hydraulic Research. https://doi.org/10.1080/00221686.2021.1944921
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright (c) 2023 Pengxu Zou, Niels Ruiter, Jeremy Bricker, Wim S.J. Uijttewaal