Abstract
Optimization techniques have been applied to breakwater design in order to automate the design process (Castillo et al. 2004, 2006). Since safety of structures is the fundamental criterion for design, a complete knowledge of the potential failure modes, as well as the possible interaction between them, is essential to provide a consistent design. Failure modes are correlated in two ways: through common parameters like HS or by physical interaction. The latter has not yet been precisely identified nor quantified. The aim of the present paper is to advance on the analysis of both types of correlations and to check how the combination of failure modes modifies the failure probability of the whole structure either increasing or decreasing it. An application to a special type of composite breakwater is proposed: the fuse parapet case, where part of the parapet fails under certain circumstances in order to ensure the whole stability of the caisson, despite increasing overtopping events.References
Burcharth, H. F., 1997. Reliability-based design of coastal structures. Advances in Coastal and Ocean Engineering. Volume 3, pp. 145-214.http://dx.doi.org/10.1142/9789812797568_0005
Castillo, E., 1988. Extreme Value Theory in Engineering. Academic Press, New York.
Castillo, E., Losada, M. A., Mínguez, R., Castillo, C., Baquerizo, A., 2004. Optimal engineering design method that combines safety factors and failure probabilities: application to rubble-mound breakwaters. Journal of waterway, port, coastal and ocean engineering. pp 77-88http://dx.doi.org/10.1061/(ASCE)0733-950X(2004)130:2(77)
Castillo, C., Mínguez, R., Castillo, E., Losada, M. A., 2006. An optimal engineering design method with failure rate constraints and sensivity analysis. Application to composite breakwaters. Coastal Engineering. 53 pp 1-25http://dx.doi.org/10.1016/j.coastaleng.2005.09.016
EurOtop, 2007. Wave Overtopping of Sea Defences and Related Structures: Assessment Manual
Galambos, J., 1987. The Asymptotic Theory of Extreme Order Statistics. Robert E. Krieger Publishing Company, Malabar, Florida.
Gómez, R., Molina, R. y Castillo, C. 2009. Propuesta de metodología para verificación de fiabilidad de una estructura marítima mediante la aplicación de la probabilidad condicionada. Jornadas españolas de Ingeniería de Costas y Puertos (en prensa) (In Spanish)
Mínguez, R., Castillo, E., Castillo, C., Losada, M. A., 2006. Optimal cost design with sensitivity análisis using decomposition techniques. Application to composite breakwaters. Structural Safety 1. pp 321-340http://dx.doi.org/10.1016/j.strusafe.2005.08.005
PROVERBS, Probabilistic design tools for vertical breakwaters, 2005
Puertos del Estado. 2001. ROM 0.0, General procedure and requirements in the design of harbour and maritime structures.