Abstract
The performance of three different hydrodynamic modelling packages is compared in this study, namely Delft3D, Delft3D FM (both developed by Deltares) and MIKE 21 FM (developed by DHI). Delft3D and MIKE 21 FM are internationally known software packages while Delft3D FM (formerly known as D-Flow FM) is a relatively new package. The models use structured approaches (Delft3D), unstructured approaches utilising triangular and quadrilateral elements (MIKE 21 FM) and unstructured approaches utilising elements ranging from linear to six sided (Delft3D FM). Models of Western Port, Australia, were developed using the three different packages to allow a comparison of performance and to determine if there are any differences in using structured versus unstructured approaches. Model performance has been assessed based on model calibration, representation of channel flows and computational efficiency. Despite the inherent differences in the grid configuration and the implementation of the numerical schemes between structured and unstructured approaches, both approaches have been shown to be able to accurately predict hydrodynamic conditions in a complex estuarine environment. The unstructured approach was found to be the most computationally efficient both when run on multiple cores (MIKE 21 FM was the most efficient) and when run on a single core (Delft3D FM was the most efficient).References
Deltares. 2014. Delft3D-Flow, Simulation of multi-dimensional hydrodynamic flows and transport phenomena, including sediments, User Manual, Version 3.15.34158, May 2014, 684 pp.
Deltares. 2015. Delft3D Flexible Mesh Suite, D-Flow FM in Delta Shell, User Manual, Version 1.1.148, November 2015, 376 pp.
DHI. 2014a. MIKE 21 Flow Model FM Hydrodynamic Module, User Manual. August 2014. 134 p.
DHI. 2014b. MIKE 21 Toolbox Global Tidal Model - Tidal Prediction, May 2014, 20 pp.
Kernkamp, H.W.J., A. Van Dam, G.S. Stelling, and E.D. de Goede. 2011. Efficient scheme for the shallow water equations on unstructured grids with application to the Continental Shelf, Ocean Dynamics, 61, 1175-1188.
Marsden, M.A.H., C.W. Mallett, and A.K. Donaldson. 1979. Geological and Physical Setting, Sediments and Environments, Western Port, Victoria, Marine Geology, 30, 11-46.
Marsden, M.A.H. and C.W. Mallett. 1975. Quaternary evolution, morphology, and sediment distribution, Westernport Bay, Victoria. Proceedings of the Royal Society of Victoria, 87, 107-138.
Miles, I.W. 1976. The morphology of northern Westernport Bay. BSc (Hons) Thesis, Department of Geography, University of Melbourne, Parkville.
Rosengren, N.J. 1984. Sites of geological and geomorphological significance in the Westernport Bay catchment. Department of Conservation, Forests and Lands Victoria, Environmental Studies Publication 401, 513 pp.
Sørensen, O.R., L.S. Sørensen, and J. Carlson. 2010. Parallelization of the flexible mesh modeling systems with MPI. International MIKE by DHI Conference 2010, Copenhagen, Denmark, 30.1-30.8.