AbstractThe interaction of a gravity wave with a steady uniform current is described in this paper. Numerical calculations of the wave length change by different non-linear wave theories show that errors in the results computed by the linear wave theory are less than 10 percent within the range of 0.15 < d/Ls s 0.40, 0.01 < Hs/Ls < 0.07 and -0.15 < U/Cs i 0.30. Numerical calculations of wave height change employing different wave theories show that errors in the results obtained by the linear wave theory in comparison with the non-linear theories are greater when the opposing relative current and wave steepness become larger. However, within range of the following currents such errors will not be significant. These results were verified by model tests. Nomograms for the modification of wave length and wave height by the linear wave theory and Stokes1 third order theory are presented for a wide range of d/Ls, Hs/Ls and U/C. These nomograms provide the design engineer with a practical guide for estimating wave lengths and heights affected by currents.
Authors retain copyright and grant the Proceedings right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this Proceedings.