AbstractThe Overtopping BReakwater for Energy Conversion (OBREC) is a new typology of overtopping wave energy converter (OTD) integrated into a traditional rubble mound breakwater. The device can be considered as an innovative non-conventional breakwater that has the same functions as the traditional structures with the added-valued of the energy production. The paper presents a comprehensive overview of the OBREC, offering a synthesis of the complete design process, from the results of the two complementary test campaigns in small scale carried out in 2012 and 2014 at Aalborg University, to the description of the full-scale device installed in Naples in 2016. The device represents the first OTD device in full-scale integrated into an existing rubble mound breakwater and it has been equipped by an instrumental apparatus to measure its response to the wave interaction. The monitoring of the full-scale device in the port of Naples, particularly during storm conditions, is aimed to study the scaling effects in wave loading and the overall performance of this breakwater-integrated OTD, included performance in terms of the energy production.
Allsop, N.W.H., J.E. McKenna, D.Vicinanza, and T.T.J. Whittaker. 1997. New design methods for wave impact loadings on vertical breakwaters and seawalls, Proceedings of the 25th International Conference on Coastal Engineering, 2, pp. 2508-2521.
Arena, F., A. Romolo, G. Malara, and A. Ascanelli. 2013. On design and building of a U-OWC wave energy converter in the Mediterranean Sea: a case study, Proceedings of the 32nd International Conference on Ocean, Offshore and Arctic Engineering, Nantes, France.
Azzellino, A., D. Conley, D. Vicinanza, and J. Kofoed. 2013. Marine Renewable Energies: Perspectives and Implications for Marine Ecosystems, Scientific World Journal, vol. 2013, 547-563.
Briganti R., G. Bellotti, L. Franco, J. De Rouck, and J. Geeraerts. 2005. Field measurements of wave overtopping at the rubble mound breakwater of Rome-Ostia yacht harbor, Coastal engineering, 52(12), 1155-1174.
Buccino, M., D. Vicinanza, D. Salerno, D. Banfi, and M. Calabrese. 2015a. Nature and magnitude of wave loadings at Seawave Slot-cone Generators, Ocean Engineering, 95, 34-58.
Buccino, M., D. Stagonas, and D. Vicinanza. 2015b. Development of a composite sea wall wave energy converter system, Renewable Energy, 81, 509-522.
Buccino, M., D. Banfi, D. Vicinanza, M. Calabrese, G. Del Giudice, and A. Carravetta. 2012. Non Breaking wave forces at the front face of seawave slotcone generators, Energies, 5(11), 4779-4803.
Burman, K., and A. Walker. 2009. Ocean Energy Technology Overview, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Federal Energy Management Program.
Contestabile, P., V. Ferrante, and D. Vicinanza. 2015. Wave Energy Resource along the Coast of Santa Catarina (Brazil), Energies 8(12), 14219-14243.
Contestabile, P., V. Ferrante, E. Di Lauro, and D. Vicinanza. 2016. Prototype overtopping breakwater for wave energy conversion at port of Naples, Proceeding of the Twenty-sixth International Ocean and Polar Engineering Conference, Rhodes, Greece, 616-621.
Contestabile, P., C. Iuppa, E. Di Lauro, L. Cavallaro, T. Lykke Andersen, and D. Vicinanza, 2017a. Wave loadings acting on innovative rubble mound breakwater for overtopping wave energy conversion, Coastal Engineering, 122, 60-74.
Contestabile, P., E. Di Lauro, M. Buccino, and D. Vicinanza. 2017b. Economic assessment of Overtopping BReakwater for Energy Conversion (OBREC): a case study in Western Australia, Sustainability, 9(1), 51.
EurOtop, Wave overtopping of sea defences and related structures: Assessment manual. 2007. N.W.H. Allsop, T. Pullen, T. Bruce, J.W. Van der Meer, H. Schuttrumpf, A. Kortenhaus. (www.overtopping-manual.com)
Falcão, A.F.d.O., and J. Henriques. 2016. Oscillating-water-column wave energy converters and air turbines: A review, Renewable Energy, 85, 1391-1424.
Gunn, K. and C. Stock-Williams. 2012. Quantifying the global wave power resource, Renewable Energy, 44, 296-304.
Herbert D.M. 1995. The overtopping of seawalls, a comparison between prototype and physical model data, Report SR 448, HR Wallingford, Wallingford, UK.
Iuppa, C., P. Contestabile, L. Cavallaro, E. Foti, and D. Vicinanza. 2016. Hydraulic Performance of an Innovative Breakwater for Overtopping Wave Energy Conversion, Sustainability, 8, 1226.
Kofoed, JP. 2002. Wave Overtopping of Marine Structures: Utilization of wave energy, Ph.D. thesis, Hydraulics & Coastal Engineering Laboratory, Department of Civil Engineering, Aalborg University, Denmark, 171 pp.
Kortenhaus, A., J. Pearson, T. Bruce, N.W.H. Allsop, and J.W. Van der Meer. 2003. Influence of parapets and recurves on wave overtopping and wave loading of complex vertical walls, Proceeding of Coastal Structures 2003, 369-381.
Margheritini, L., D. Vicinanza, and P. Frigaard. 2009. SSG wave energy converter: design, reliability and hydraulic performance of an innovative overtopping device, Renewable Energy, 34, 1371-1380.
Medina-Lopez, E., N.W.H. Allsop, A. Dimakopoulos, and T. Bruce. 2015. Conjectures on the Failure of the OWC Breakwater at Mutriku, Proceedings of Coastal Structures and Solutions to Coastal Disasters Joint Conference, Boston, Massachusetts.
Mørk, G., S. Barstow, A. Kabuth, and M.T. Pontes. 2010. Assessing the global wave energy potential, Proceeding of the 29th International Conference on Ocean, Offshore and Arctic Engineering, ASME 2010, 447-454
Oliveira, P., F. Taveira-Pinto, T. Morais, and P. Rosa-Santos. 2016. Experimental evaluation of the effect of wave focusing walls on the performance of the Sea-wave Slot-cone Generator, Energy Conversion and Management, 110, 165-175.
Pearson, J., T. Bruce, N.W.H. Allsop, A. Kortenhaus, and J. van der Meer. 2004. Effectiveness of recurve walls in reducing wave overtopping on seawalls and breakwaters, Proceeding of 29 International Coastal Engineering Conference, ASCE, 29 (4), 4404-4416.
Pullen T., W. Allsop, T. Bruce, and J. Pearson. 2009. Field and laboratory measurements of mean overtopping discharges and spatial distributions at vertical seawalls, Coastal Engineering, 56(2), 121-140.
Takahashi, S., H. Nakada, H. Ohneda, and M. Shikamori. 1992. Wave power conversion by a prototype wave power extracting caisson in Sakata port, Proceedings of 23rd International Conference on Coastal Engineering, ASCE, 3440-3453.
Torre-Enciso, Y., I. Ortubia, L.I. Lopez de Aguileta, and J. Marques. 2009. Mutriku wave power plant: from the thinking out to the reality, Proceeding of the 8th European Wave Tidal Energy Conference, Uppsala, Sweden, 319-329.
Torre-Enciso, Y., J., Marques, and L.I. Lopez de Aguileta. 2010. Mutriku: Lessons learnt, Proceeding of the 3th International Conference on Ocean Energy, Bilbao.
Troch P., J. Geeraerts, B. Van de Walle, J. De Rouck, L. Van Damme, W. Allsop, and L. Franco. 2004. Full-scale wave overtopping measurements on the Zeebrugge rubble mound breakwater, Coastal Engineering, 51, 609-628.
Van Doorslaer, K. and J. De Rouck. 2011. Reduction on Wave Overtopping on a Smooth Dike by Means of a Parapet, Coastal Engineering Proceedings, 1(32), p.6.
Vicinanza, D., L. Cappietti, V. Ferrante, and P. Contestabile. 2011. Estimation of the wave energy in the Italian offshore, Journal of Coastal Research, 64, 613-617.
Vicinanza, D., J.H. Nørgaard, P. Contestabile, and T. Lykke-Andersen. 2013a. Wave loadings acting on overtopping breakwater for energy conversion, Journal of Coastal Research, Special Issue 65, 1669-1674.
Vicinanza, D., P. Contestabile, and V. Ferrante. 2013b. Wave energy potential in the north-west of Sardinia (Italy), Renewable Energy, 50, 506-521.
Vicinanza, D., P. Contestabile, J. Nørgaard, and T. Lykke-Andersen. 2014. Innovative rubble mound breakwaters for overtopping wave energy conversion, Coastal Engineering, 88, 154-170.
Zanuttigh, B., and J.W. van der Meer. 2008. Wave reflection from coastal structures in design conditions, Coastal engineering, 55, 771-779.