Resumen
The difficulties inherent in the direct determination of loads on off-shore structures which are exposed simultaneously to wind and waves make it desirable to model each situation in the laboratory It is shown here that scaling of the loads and the waves is possible by using waves which are generated by blowing air over the surface of a laboratory channel, and by choosing a model material with an appropriate modulus of elasticity Wind-generated waves such as those measured m the wind water tunnel of Colorado State University have a dimensionless spectrum (Hidy and Plate (1965)) that is identical in shape to that found off the coast of Florida under hurricane conditions (Collins (1966)) Furthermore, it has been shown that hydro-elastic modeling is quite feasible (LeMehaute (1966)) These two results are combined to give modeling criteria for off-shore structures if direct wind forces are disregarded.
Authors retain copyright and grant the Proceedings right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this Proceedings.