How to Cite
Abstract
Armored sloped structures are generally used to provide the safety of their lee side, i. e. harbours and coastal regions against wave attacks and storm surge. Recently, due to the potential impact of climate change, increasing emphasis has been placed on their hydraulic performance (e.g. Pillai et al. 2019). Thus, accurate estimation of wave overtopping rate, as the hydraulic response of coastal structures, has an important role in design. Wave overtopping is a complex phenomenon and depends on structural geometry and wave characteristics. Hence, empirical formulae are generally used for estimation of mean overtopping rate. These formulae have been derived from laboratory measurements in which the dimensionless measured overtopping rates are correlated with the dimensionless structural and hydraulic parameters through physical arguments. The most well-known formulae for wave overtopping prediction can be found in the Coastal Engineering Manual (2012) and European Overtopping Manual (EurOtop, 2018). The CLASH database as one of the most comprehensive datasets, was initially provided by De Rouck and Geeraerts (2005). This data base was recently updated by including more test results (EurOtop, 2018). However, a detailed comparison of formulae proposed for the estimation of overtopping rates at rubble mound sloped structures is not reported. The present paper aims to evaluate the performance of existing empirical formulae namely EurOtop 2018 (hereafter ET18), Owen (1982), van der Meer and Janssen (1995) (hereafter VMJ) and Jafari and Etemad-Shahidi (2012) (hereafter JES) against EurOtop database (updated CLASH database). The analysis includes structures with different armor types (rock, concrete cubes etc.) with both impermeable and permeable cores, to evaluate the capability of used formulae under different conditions.Recorded Presentation from the vICCE (YouTube Link): https://youtu.be/0TL5zFCf6GU
References
Coastal Engineering Manual (2012): U.S. Army Corps of Engineers.
De Rouck, Geeraerts (2005): CLASH-final report: full scientific and technical report.
Etemad-Shahidi, Jafari (2014): New formulas for prediction of wave overtopping at inclined structures with smooth impermeable surface, ELSEVIER, Ocean Engineering, vol. 84, pp. 124-132
EurOtop (2018): Manual on Wave Overtopping of Sea Defences and Related Structures. In van der Meer, Allsop, Bruce, De Rouck, Kortenhaus, Pullen, Schüttrumpf, Troch, & Zanuttigh (Eds.).
Jafari, Etemad-Shahidi (2012): Derivation of a new model for prediction of wave overtopping at rubble mound structures, Journal of Waterway, Port, Coastal, and Ocean Engineering, ASCE, vol. 138, pp. 42-52.
Owen (1982): The hydraulic design of seawall profiles Proceeding of the coastal protection conference, Institution of civil engineering, Thomas Telford Publishing, London, UK, pp. 185-192.
Pillai, Lemckert, Etemad-Shahidi, Cappietti, Sigurdarson (2019): Effect of Sea Level Rise on the Wave Overtopping Rate at Berm Breakwater, Journal of Waterway, Port, Coastal, and Ocean Engineering, ASCE, vol. 145, No. 5, pp. 04019019.
van der Meer, Janssen (1995): Wave Run-Up and Wave Overtopping at Dikes, In Wave Forces on Inclined and Vertical Wall Structures, Kobayashi and Demirbilek, eds., ASCE, pp. 1-27.
van Gent, van den Boogaard, Pozueta, Medina (2007): Neural network modelling of wave overtopping at coastal structures. Coastal engineering, ELSEVIER, vol. 54, No. 8, 586-593.
Verhaeghe (2005): Neural network prediction of wave overtopping at coastal structure. Doctoral dissertation, Ghent Univ., Ghent, Belgium.