AbstractThe paper demonstrates the use of the geometrical design rules for berm breakwaters in a potential project in Greenland. With practically no information about the sizes of armourstone that could be used for the design, the initial phase of the study looked at the full range of the stability parameter Hs/Î"Dn50 of 1.7 to 3.0 for the design wave height of Hs=4.4 m. This corresponds to armourstone classes ranging from 5-15 t down to 1-3 t. Six different design options based on six different options for the largest stone class are compared. The final design then relies on the actual quarry yield, the total volume of material needed for the project and the construction equipment that can be brought to the site.
Sigurdarson, S. and J.W. van der Meer. 2015. Design and construction of berm breakwaters. Proceedings of Coastal Structures 2015, ASCE.
Sigurdarson, S., J.W. van der Meer, E. Bijl, Yang Sihan, Tang Qiaoliang, Zhang Xiaoqiang, James KS Goh and D. Heijboer. 2014. Icelandic-type berm breakwater for the Hambantota artificial island revetment, application of geometrical design rules. Proceedings of 34th Conference on Coastal Engineering, ASCE.
Sigurdarson, S. and J.W. van der Meer. 2013. Design of berm breakwaters, recession, overtopping and reflection. Proceedings of Coasts, Marine Structures and Breakwaters 2013, ICE.
Sigurdarson, S. and J.W. van der Meer, 2012. Wave overtopping at berm breakwaters in line with EurOtop. Proceedings of 33rd Conference on Coastal Engineering, ASCE.
Van der Meer, J.W. and S. Sigurdarson. 2016. Design and Construction of Berm Breakwaters. World Scientific. Advanced Series on Ocean Engineering, Volume 40. ISBN 978-981-4749-60-2.
Van der Meer, J.W. and S. Sigurdarson, 2014. Geometrical design of berm breakwaters, Proceedings of 34th Conference on Coastal Engineering, ASCE.